Follow these easy steps to get your AEG FAVORIT 40360 i Dishwasher up and running in no time.
Ensure that the dishwasher has not been damaged during transportation. Do not connect a damaged appliance. Contact your supplier if there is any damage.
Place the dishwasher on a firm, level floor. Adjust the threaded feet to compensate for any unevenness in the floor, ensuring that the appliance is stable and level.
Connect the dishwasher to a cold or hot water supply, ensuring that the water inlet hose is not kinked or crushed. Tighten the threaded hose fitting hand tight only.
Ensure that the nominal voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also on the rating plate.
To prevent scale build-up, adjust the water softener to match the hardness of your water supply.
Fill the water softener with special salt to ensure optimal performance and prevent limescale.
Fill the rinse aid dispenser to enhance drying performance and prevent water spots on dishes.
Remove large left-overs from dishes and load them into the dishwasher, ensuring that the spray arms can rotate freely.
Choose a suitable wash programme using the programme selector and start it. Ensure that the dishwasher door is closed properly.